Frequently Asked Questions
Retrofit Promotions FAQ's
- What shanks can be retrofitted?
- How much does it cost?
- How long will the retrofit take?
- Can the reach of the bar be extended?
- How is the retrofit identified?
Versabar® Specials FAQ's
- What's the first step?
- Will a concept drawing be provided for approval?
- How long will it take?
- What about a performance guarantee?
- Is hardware included?
What shanks can be retrofitted?
Any carbide or heavy metal shank of the size and minimum length (shank only) as follows
can be retrofitted.
| Diameter Inch | Diameter Metric | Min Length | Head Size |
|---|---|---|---|
| .375" | 10 | 2.5" | VH06 |
| .500" | 12 | 3.0" | VH08 |
| .625" | 16 | 3.5" | VH10 |
| .750" | 20 | 4.0" | VH12 |
| 1.00" | 25 | 5.0" | VH16 |
| 1.25" | 32 | 5.0" | VH20 |
| 1.50" | 40 | 6.0" | VH24 |
| 2.00" | 50 | 8.0" | VH24 |
Shanks double (or more) the above length can be cut in half and become stub-length bars.
*Note: 2.00" shanks are hand specific (RH or LH) and utilize VH24 heads.
How much does it cost?
Pricing for retrofitting used shanks is found in the Versabar® Price List.
For pricing CLICK HERE.
How long will the retrofit take?
Typically 1-2 weeks. The exception may be when special Versabar® heads are ordered with the retrofits. In such case the retrofit will ship complete with the special heads.
Can the reach of the bar be extended?
Yes. A connector with extended length can be installed to increase the reach of the bar. The standard connector length is 1xbD (bar diameter). Extensions of 2xbD and 4xbD are available on shanks ranging from .625" (M16) to 1.50" (M40). 4xbD extensions are equipped with damping mechanism to reduce vibration.
How are the retrofit/repairs identified?
The retrofit or repaired shank is identified with a standard Versabar® designation. The part number is identical to new Versabar® shanks except for the suffix added at the end of the part number:
R1 = Retrofit/Repair with standard length connector (1xbD)
R2 = Retrofit/Repair with 2xbD connector
R4 = Retrofit/Repair with 4xbD connector (damped)
What's the first step?
If the request is for a design and build custom Versabar® head, email sales@toolsaverinc.com providing as much detail as possible. If more details are required, our design department will email with the details necessary to provide the quote.
Will a concept drawing be provided for approval?
Yes, usually within 5 business days after receipt of purchase order.
How long will it take?
Special quotes are normally processed within 24 hours after necessary details have been gathered and the concept has been conceived. Lead time projection is based upon specials backlog at the time of quotation. Ship date provided on order confirmation may be longer than lead time estimate on the quotation when there is a gap of several days (weeks) between the quote date and the order date. When a shorter lead time is requested, our customer service will include Speedy expedite options on the quote.
What about a performance guarantee?
Specials are guaranteed to conform dimensionally to the approved sketch. Factors such as age and condition of equipment utilized, stability of the workpiece, overhang, programming parameters, insert geometry and grade, and variations in the material machined, prevent us from providing a guarantee of specific performance.
Is hardware included?
Special Versabar® heads designed with standard Versabar® components are supplied with hardware. Special heads utilizing proprietary components are supplied less hardware.